NBK – Couplings for Vacuum Variable Capacitor MSXP-C-W-SP
Couplings for Vacuum Variable Capacitor – Slit-type (PEEK) – Clamping Type
Unit : mm
Part Number | A | L | W | F | G | M | D1 | D2 | Screw Tightening Torque(N・m) |
CAD | RFQ |
---|---|---|---|---|---|---|---|---|---|---|---|
MSXP-25C-W40-5-6.35-SP3 | 25 | 11.4 | 40 | 4.5 | 9 | M3 | 5 | 6.35 | 0.6 | CAD | RFQ |
●All products are provided with hex socket head cap screw.
MSXP-C-W-SP | |
---|---|
Main unit | PEEK (Polyether ether ketone) |
Hex Socket Head Cap Screw | SUSXM7 |
MSXP-C-W-SP | |
---|---|
Zero Backlash | ◎ |
Allowable Misalignment | ○ |
Electrical Insulation | ◎ |
Allowable Operating Temperature | -20°C to 120°C |
High frequency power / Matching box
In principle, use a round shaft.
If a D-cut shaft is used, an excessive load due to tightening by the hex socket head cap screw may damage the coupling, depending on the mounting position of the D-cut surface of the shaft.
When using a D-cut shaft, mount so that the D-cut surface of the shaft avoids contact with the coupling slit as much as possible.