NBK – Couplings for Vacuum Variable Capacitor MSXP-C-W-SP

NBK-1

Couplings for Vacuum Variable Capacitor – Slit-type (PEEK) – Clamping Type

Dimension Drawing

MSXP-C-W-SP Dimension Figure

Specs/CAD

Unit : mm

Part Number A L W F G M D1 D2 Screw Tightening
Torque(N・m)
CAD RFQ
MSXP-25C-W40-5-6.35-SP3 25 11.4 40 4.5 9 M3 5 6.35 0.6 CAD RFQ

●All products are provided with hex socket head cap screw.

Material/Finish

MSXP-C-W-SP
Main unit PEEK (Polyether ether ketone)
Hex Socket Head Cap Screw SUSXM7

Structure

Characteristics

  • This is a resin spring coupling with single-piece construction. A slit is inserted into a cylindrical material.
  • PEEK superior in physical properties and electrical insulation is adopted.
  • A plate spring formed by a slit allows eccentricity, argument, and end-play to be accepted.

Property

MSXP-C-W-SP
Zero Backlash
Allowable Misalignment
Electrical Insulation
Allowable Operating Temperature -20°C to 120°C

Application

High frequency power / Matching box

Precautions for Use

Mounting on D-cut shaft

In principle, use a round shaft.
If a D-cut shaft is used, an excessive load due to tightening by the hex socket head cap screw may damage the coupling, depending on the mounting position of the D-cut surface of the shaft.
When using a D-cut shaft, mount so that the D-cut surface of the shaft avoids contact with the coupling slit as much as possible.

Trả lời

Thư điện tử của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *