Categorise |
Incremental
Shaft model |
Diameter |
25 dia. |
Power supply voltage |
DC12-10% to 24+15% V (ripple (p-p): 5% max.) |
Current consumption |
20 mA DC max. |
Resolution |
360 P/R |
Inrush current |
Approx. 9 A (Time: Approx. 0.3 ms) |
Output phases |
A |
Control output (Output type) |
NPN open collector |
Control output (Load power supply voltage) |
30 VDC max. |
Control output (Load current) |
30 mA max. (Sink current) |
Control output (Residual voltage) |
0.4 VDC max. (at sink current 30 mA) |
Max. response frequency |
30 kHz |
Output duty factor |
50±25% |
Starting torque |
1 mN.m max. |
Moment of inertia |
1 x 10**-7 kg.m**2 max. |
Shaft loading |
Radial: 10 N
Thrust: 5 N |
Max. permissible rotation |
5000 r/min |
Ambient temperature |
Operating: -10 to 55 ℃
Storage: -25 to 80 ℃
(with no icing) |
Ambient humidity |
Operating: 35 to 85% RH
Storage: 35 to 85% RH
(with no condensation) |
Insulation resistance |
Between charged parts and the case: 20 MΩ min. at 500 VDC |
Dielectric strength |
Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min |
Vibration resistance |
10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h |
Shock resistance |
500 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection |
IEC: IP50 |
Connection method |
Pre-wired models (Cable_length: 2 m) |
Material (body) |
Aluminum |
Material (case) |
Aluminum alloy |
Material (shaft) |
SUS420J2 |
Material (mounting bracket) |
Iron zinc plating |
Accessories |
Instruction manual, coupling and hex-head spanner |
Categorise |
Incremental
Shaft model |
Diameter |
25 dia. |
Power supply voltage |
DC12-10% to 24+15% V (ripple (p-p): 5% max.) |
Current consumption |
20 mA DC max. |
Resolution |
360 P/R |
Inrush current |
Approx. 9 A (Time: Approx. 0.3 ms) |
Output phases |
A |
Control output (Output type) |
NPN open collector |
Control output (Load power supply voltage) |
30 VDC max. |
Control output (Load current) |
30 mA max. (Sink current) |
Control output (Residual voltage) |
0.4 VDC max. (at sink current 30 mA) |
Max. response frequency |
30 kHz |
Output duty factor |
50±25% |
Starting torque |
1 mN.m max. |
Moment of inertia |
1 x 10**-7 kg.m**2 max. |
Shaft loading |
Radial: 10 N
Thrust: 5 N |
Max. permissible rotation |
5000 r/min |
Ambient temperature |
Operating: -10 to 55 ℃
Storage: -25 to 80 ℃
(with no icing) |
Ambient humidity |
Operating: 35 to 85% RH
Storage: 35 to 85% RH
(with no condensation) |
Insulation resistance |
Between charged parts and the case: 20 MΩ min. at 500 VDC |
Dielectric strength |
Between charged parts and the case: 500 VAC at 50/60 Hz for 1 min |
Vibration resistance |
10 to 55 Hz, 1.5-mm double amplitude each in X, Y, and Z directions for 2 h |
Shock resistance |
500 m/s**2 for 3 times each in X, Y, and Z directions |
Degree of protection |
IEC: IP50 |
Connection method |
Pre-wired models (Cable_length: 2 m) |
Material (body) |
Aluminum |
Material (case) |
Aluminum alloy |
Material (shaft) |
SUS420J2 |
Material (mounting bracket) |
Iron zinc plating |
Accessories |
Instruction manual, coupling and hex-head spanner |
XEM CATALOG SẢN PHẨM TẠI ĐÂY