Power rating 100 W
Efficiency 81 % min.
Rated input voltage 100 to 240 VAC
Allowable input voltage variable range 85 to 264 VAC
80 to 370 VDC
Note at DC input The range for compliance with EC Directives and safety standards (UL, EN, etc.) is 100 to 240 VAC (85 to 264 VAC).
Frequency 50/60 Hz (47 to 63 Hz)
Rated input curren 1.4 A max.
0.75 A max.
Power factor 0.9 min.
Leakage current 0.5 mA max. (at 100 VAC input)
1 mA max. (at 200 VAC input)
Inrush current 17.5 A max.
35 A max.
Output voltage 24 VDC
Output voltage variable range -10 to +15% (With V. ADJ)
Ripple 2 %(p-p) max. (Under the rated I/O conditions.)
Static input variation influence 0.4% max. with AC input voltage
Static load variation influence 0.8% max. at rated input, 0 to 100% load
Ambient temperature variation influence 0.05 %/℃ max. (At rated input/output voltage)
Rated output current 4.5 A
Start up time 1000 ms max.
Hold time 20 ms min.
Overload protection 105% to 160% of the rated output current, Voltage drop, Automatic reset
Overvoltage protection Operated at 130% min. of the rated output voltage, Shut-off
Resetting: Reset the power by turning it back (OFF time: at least 3 min)
Overheat protection No
Parallel operation No (However, backup operation is possible; external diodes required.)
Series operation Yes (Up to 2 Power Supplies with external diode)
Dielectric strength Between all inputs and all outputs: 3 kVAC for 1 min (Detection current: 20 mA)
Between all inputs and PE terminals: 2 kVAC for 1 min (Detection current: 20 mA)
Between all outputs and PE terminals: 1 kVAC for 1 min (Detection current: 20 mA)
Insulation resistance Between all outputs and all inputs/ PE terminals: 100 MΩ min. (at 500 VDC)
Vibration resistance 10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance 150 m/s**2, in each 6 directions 3 times
Output indicator Yes (color: green)
Heat radiation Natural air-cooling
Construction Covered type
Structure Terminal blocks
Terminal type Screw terminal


Sản phẩm cùng loại